Block CheckerBlock Checker← Check another block

Suburb guide · 2560

Can I build a duplex or granny flat in Appin?

Appin sits in Wollondilly Shire Council's area under Wollondilly Local Environmental Plan 2011. We ran 25 real Appin addresses through the checker: the typical block is 1,380 m² with 21.3 m of frontage, 19 of the 25 could add a granny flat, and 8 could carry two separate homes today.

Thinking of building or selling in Appin?

Tell us what you have in mind and we'll read your block and come back to you within a day. Free, no obligation.

1,380 m²typical block
21.3 mtypical frontage
19 of 25could add a granny flat
8 of 25could carry two homes

The typical Appin block

The middle block of the 25 we checked is 1,380 m² with 21.3 m of street frontage. The smallest was 452 m² and the largest 587,455 m². Zones in the sample: R2 (19), RU2 (5), SP2 (1).

under 450 m² 0
450–599 m² 2
600–699 m² 0
700–799 m² 3
800–999 m² 3
1,000 m²+ 17

The 25 blocks we checked, by land size.

What homes sell for in postcode 2560

Median sale prices for the whole of postcode 2560, January to March 2026. These cover every suburb sharing the postcode, not Appin alone, and they are not a value for any one block.

  • Houses: $1.03m (206 sales)
  • Units and apartments: $630k (65 sales)

Source: NSW Government Rent and Sales Report (Department of Communities and Justice), sales tables by postcode, NSW Government. Updated each quarter.

A granny flat

19 of the 25 blocks we checked could take one. Wollondilly LEP cl 5.4(9) — the greater of 60 m² or 25% of the house’s total floor area, parking excluded. Separately, the state Housing SEPP allows a granny flat of up to 60 m² through the ten-day complying-development route on a lot of 450 m² or more with a 12 m frontage, where the land is not flood, bushfire or heritage constrained.

Dual occupancy (duplex) rules in Appin

8 of the 25 blocks we checked could carry two or more separate homes today.

Under Wollondilly Local Environmental Plan 2011 a dual occupancy needs 800 m² — this LEP sets no frontage minimum, so Council's DCP governs width.

Of the 19 ordinary R2 blocks in our sample sitting outside the Low and Mid-Rise area, 14 had the 800 m². There is no LEP frontage test to pass here, but Council's DCP still judges width, setbacks and private open space, so clearing the area alone does not settle it.

Low and Mid-Rise

None of the 25 blocks we checked fell inside the state Low and Mid-Rise area, so in this part of Appin the LEP minimums are what count. The boundary is a walking distance from a listed centre, so it can cut through a suburb — the checker reads which side of it your own address sits on.

What else turned up

14 of 25 were on bushfire-prone land. Any of those takes a block out of the fast-track routes and into a full DA, so it changes the answer more than the lot size does.

How we got these numbers

We took 25 real Appin street addresses from the NSW geocoder and ran every one through the same engine this site runs for you, reading the planning controls live. Nothing here is modelled or estimated.

It is a sample, not a census. The addresses are a spread across what the geocoder returns, so treat these as "of the 25 blocks we checked" rather than a figure for every block in Appin. Your own block is the only one that answers for itself — that is what the box on the right is for.

1,380 m²21.3 m × 65 m
The typical block already clears the dual-occupancy minimum.
Check your own Appin block

Enter the address — lot, frontage, zone, constraints and what it can carry.

Appin people — agent · planner · architect · builder.
More: the Wollondilly Shire Council guide · duplexes in Wollondilly · granny flats in Wollondilly.
Nearby suburbs — Menangle · Brownlow Hill · Camden Park · Cawdor · Glenmore · Mount Hunter · Orangeville · Theresa Park.
What would it cost to build? a duplex · terraces or townhouses · a knockdown rebuild · a manor house · a granny flat (Sydney build costs, Cost Checker).
Finding the address…